SM4A342PC272DN0c0380

Power supply voltage 18 [Vac] ÷ 56 [Vac]
Separated logic power supply 24 [Vcc] ÷ 24 [Vcc]
Output current 0.0 [A/ph rms] ÷ 4.2 [A/ph rms] 0.0 [A/ph peak] ÷ 6.0 [A/ph peak]
Interface control mode CANBus CANopen (DS402)
Digital inputs 4 optoisolated digital inputs 200 kHz 5 Vdc line driver or 24 Vdc PNP.
Digital outputs 2 optoisolated digital outputs PNP, 24 Vdc - 100 mA.
Analog inputs 1 analog input (potentiometer or ±10Vdc)
Open or Close loop Open loop
Step resolution Stepless Control Technology (65536 emulated positions per turn)
Safety protections Over/under-voltage, Over Current, over Temperature, short circuit phase/phase and phase/ground
Operative temperature 0 [°C] ~ 50 [°C]
Storage temperature 0 [°C] ~ +55 [°C]
Humidity 0 [%] ~ 90 [%]
Protection class IP65
Dimensions H x L x W 124,0 [mm] x 60,0 [mm] x 120,5 [mm]
Weight 2,05 [Kg.]
Software settings and connections SCI service interface for configuring in real time with SL-Monitor software.
Bipolar holding torque 210 [Ncm] min.
Rotor inertia 570 [g.cm²]

Principal features

● Multiple control modes
● Equipped with advanced safety functionalities: √ fully tested for direct installation unit √ built in watch dog functionality √ integrated diagnostic and fault monitoring √ separated power supply for logic and power √ on field working errors buffering and handling
● Stepless control technology
● Low motor vibrations
● Compact size
● Low mechanical noise
● No resonance
● IP65 protection class
● Low heat generation
● High reliability
● AC power supply
● High speed and torque

Functions

• Control modes:
• Velocity control mode
• Wide range of Positioning Control Modes (homing, relative, absolute, target)
• Electric Gear with programmable gear ratio to track external master reference (from fieldbus or incremental encoder) of motor Speed and Position
• High speed I/O triggered motor start & stop to event syncronizing for fast response demanding application: labeling, nick_finder, on fly cut., etc ...
• Multi Axis movements syncronization capability
• On fly change among any Motion Module Control Modes
• On fly Electric Gear Enable/Disable capability
• Drive control through commands by Master Controller. Suitable for multi axes systems (up to 127 drives). Built in Powerful Motion Module functionality assures Perfect Synchronization among axes and reduces Master Controller workload.
• Configuration of the drive with SCI service interface. It is available the software kit SM4A_SERV00-SL comprehensive of converters e cables from serial service to RS485 and from RS485 to USB. In the kit you will find a CD-Rom with the necessary SL-Monitor software.

   CONNECTORS KIT    

 Code       Description                     
 SM4A3KIT-01Connectors kit with 100 cm. cable                      
 SM4A3KIT-C01Connectors kit for cabling  

   SOFTWARE KITS FOR CONFIGURATION

 Code       Description                     
 SM4A_SERV00-SL      Software kit for drive configuration with Ever Studio + 200 cm. serial cable with serial/USB converter


The SM4A line is a series of high performance and local logic vector drives suitable to be connected via CANbus (CANopen DS301/DS402), or serial (Modbus-RTU) to single or multi-axle systems in slave mode. Consisting of a Full Digital vector drive with "Else" firmware and a high torque 50-pole NEMA24 motor. Quickly configurable thanks to the interface for PC Windows SL-Monitor, these units are available in a wide range of powers. The SM4A series, as well as combining compactness and power, offers maximum versatility and reliability, allowing considerable savings in wiring and electrical panels. With the hardware resources available in the different versions, together with the implementation of the Advanced Power Motion Module, you can operate your application in a quick and easy manner.
Stepper drives > Two phases > Fieldbus > Smart Motor > SM4A342PC272DN0c0380
Technologies

CANopen is a standard communication protocol widely used in the industrial automation fields. First developed for use with CAN fieldbus, it has also been applied to other types of fieldbuses such as Ethercat CoE.

Thanks to the ELSE technology integrated in the Ever Elettronica’s drives motors current control is so high that vibrations, resonances and noises don’t exist anymore.

The innovative f4d2 technology allows the motor’s excitation at high efficiency chopper thanks to the calculations speed for the current regulation performed by the drive's microprocessor and thanks to a proprietary patented algorithm.

Functionalities

Operating with digital signals from external controller or via Canbus (Canopen DS402)

Connection/Control

Setting of parameters and functions in real time with serial service interface.

Stepper drives > Two phases > Fieldbus > Smart Motor > SM4A342PC272DN0c0380

Mechanical drawing

Dimensions in mm

Stepper drives > Two phases > Fieldbus > Smart Motor > SM4A342PC272DN0c0380

Related product to SM4A342PC272DN0c0380
 Universal environment for the configuration and diagnostics of all drives of the Titanio line with fieldbus.

Universal environment for the configuration and diagnostics of all drives of the Titanio line with fieldbus.

Contacts Newsletter