Power supply voltage 18 [Vac] ÷ 100 [Vac]
Output current 0 [A/ph rms] ÷ 8.0 [A/ph rms] 0 [A/ph peak] ÷ 11.0 [A/ph peak]
Interface control mode Serial RS232/RS485 Modbus.
Power stage 40 KHz H bridge bipolar chopper
Digital inputs 4 optoisolated digital inputs
Digital outputs 2 optoisolated digital outputs (100 mA)
Analog inputs 2 analog digital inputs ±10Vdc or potentiometer
Open or Close loop Closed loop
Step resolution StepLess technology
Safety protections Over / under-voltage, over current, over temperature, short-circuit phase / phase and phase / phase ground
Operative temperature 0 [°C] ~ +50 [°C]
Storage temperature 0 [°C] ~ +55 [°C]
Humidity 0 [%] ~ 90 [%]
Protection class IP65
Dimensions H x L x W 135.0 [mm] x 86.0 [mm] x 215.0 [mm]
Weight 6.20 [Kg.]
Software settings and connections Programmable with ATOMIC IDE
Bipolar holding torque 1250 [Ncm] min.
Rotor inertia 4000 [g.cm²]
Encoder 400 ppr incremental encoder
The SM line is a full digital local logic drives series, programmable and equipped with PLC functionality with a 50-pole motor integrated and an encoder to close the current, speed and position loop. These servomotors are suitable for use in 'stand alone' mode and can be connected to HMI touch screen for application parameters. They also have a serial interface (Modbus-RTU) for programming and debugging the application thanks to the Atomic IDE software environment that allows the user to access all the functions and resources of the device and to manage and synchronize the Module Movement and resources of other drives with each process event. In addition there are several ready-to-use and easily customizable modules for servomotor management in applications such as: labeling, cam management, cable processing, plate orientation, adjusting printing registers and others.

Principal features

  1. ● Multiple Control Modes
  2. ● With Advanced Safety Features: √ tested for direct unit installations √ integrated watch dog features √ integrated diagnostics and monitoring of faults √ error buffer and field management
  3. ● Closed loop of speed, torque and current.
  4. ● Low motor vibrations
  5. ● Low mechanical noise
  6. ● Low heat generation
  7. ● Compact size
  8. ● IP65 protection
  9. ● No resonance
  10. ● High reliability
  11. ● AC power supplies
  12. ● Wide range of power.


  1. • Control mode
  2. • Progrmmable with PLC functionalities and 'Stand alone control mode'
  3. • Velocity control mode
  4. • Different positioning Control Modes (homing, relative, absolute, target)
  5. • Electric Gear with programmable gear ratio to track external master reference (from fieldbus or incremental encoder) of motor Speed and Position
  6. • High speed I/O triggered motor start & stop to event syncronizing for fast response demanding application: labeling, nick_finder, on fly cut., etc ...
  7. • CAM mode with programmable profiles
  8. • Multi Axis movements syncronization capability
  9. •On fly change among any Motion Module Control Modes
  10. •On fly Electric Gear Enable/Disable capability
  11. • Control of the drives by commands from the Master Controller. Suitable for Multi-Axis Systems (up to 127 drives). Integrates all the features of the Power Motion Module that ensures perfect synchronization between the axes and reduces the workload of the Master Controller
  12. • Programming and debugging of the drive through serial interface. For this purpose, the SM2A_ATMU-00 soft-start kit is available, including converters and cables from serial interface to to USB. The kit is accompanied by a CD-Rom with Atomic IDE software in the demo version.


Integrated PLC functionalities.


Drives programming and debug through Atomic IDE


Mechanical drawing

Dimensions in mm


Similar to SM2A660PN363E40c0499
Programming environment for SM2A servo-drives.

Programming environment for SM2A servo-drives.