SM4A342PM242C40c0490

Power supply voltage 18 [Vac] ÷ 56 [Vac]
Separated logic power supply 24 [Vcc] ÷ 24 [Vcc]
Output current 0.0 [A/ph rms] ÷ 4.2 [A/ph rms] 0.0 [A/ph peak] ÷ 6.0 [A/ph peak]
Interface control mode Serial RS485 (Modbus-RTU)
Digital inputs 4 digital optoisolated inputs 200 kHz 5 Vdc line driver oppure 24 Vdc PNP.
Digital outputs 2 digital optoisolated outputs PNP, 24 Vdc - 100 mA.
Open or Close loop Closed loop
Step resolution Stepless Control Technology (65536 emulated positions per turn)
Safety protections Over / under-voltage, over current, over temperature, short-circuit phase / phase and phase / phase ground
Operative temperature 0 [°C] ~ 50 [°C]
Storage temperature 0 [°C] ~ +55 [°C]
Humidity 0 [%] ~ 90 [%]
Protection class IP20
Dimensions H x L x W 124,0 [mm] x 60,0 [mm] x 110,5 [mm]
Weight 1,62 [Kg.]
Software settings and connections SCI service interface for real time programming and debugging with eePLC Studio IDE software
Bipolar holding torque 165 [Ncm] min.
Rotor inertia 300 [g.cm²]
Encoder 400 ppr incremental (also 1000 ppr or 2000 ppr)
The SM4 line is a series of vectorial full digital drives with an integrated 50-poles motor and an encoder, with local logic, programmable and equipped with PLC functionality. Suitable for use in 'stand alone' mode and connected to HMI touch screen for application parameters, these units have a serial interface (Modbus-RTU) for programming and debugging the application thanks to the eePLC Studio software environment which allows the user to access all the functions and resources of the device and to manage and synchronize the Movement Module, also in Closed-loop, and the resources of other drives with each process event. They also have ready-to-use and easily customizable modules such as: label management, cam management, cable processing, plate orientation, adjustment of printing registers and others.

Principal features

  1. ● Multiple Control Modes
  2. ● With Advanced Safety Features: √ integrated diagnostics and monitoring of faults √ separate power supply for logic and power √ error buffer and field management
  3. ● Closed loop of torque, speed and position
  4. ● Stepless control technology
  5. ● Low motor vibrations
  6. ● Compact size
  7. ● Low mechanical noise
  8. ● No resonance
  9. ● IP65 Protection
  10. ● Low heat generation
  11. ● High reliability
  12. ● AC Power supply
  13. ● Alta velocità e coppia

Functions

  1. • Control mode
  2. • Velocity control mode
  3. • Different positioning Control Modes (homing, relative, absolute, target)
  4. • Electric Gear with programmable gear ratio to track external master reference (from fieldbus or incremental encoder) of motor Speed and Position
  5. • High speed I/O triggered motor start & stop to event syncronizing for fast response demanding application: labeling, nick_finder, on fly cut., etc...
  6. • Multi Axis movements syncronization capability
  7. •On fly change among any Motion Module Control Modes
  8. •On fly Electric Gear Enable/Disable capability
  9. • Control of the drives by commands from the Master Controller. Suitable for Multi-Axis Systems (up to 127 drives). Integrates all the features of the Power Motion Module that ensures perfect synchronization between the axes and reduces the workload of the Master Controller
  10. • Programming and debugging of the drive through Service SCI. For this purpose, the SM4A_SERV00-EE soft-start kit is available, including converters and cables from service serial to RS485 and from RS485 to USB. The kit is accompanied by a CD-Rom with eePLC Studio IDE software in the demo version
SM4A_C

Programming

PLC functionalities integrated

Connection /Control

Real time programming through Serial Service Interface

SM4A_colleg_prog

Mechanical drawing

Dimensions in mm

sm4a_meccanica_C_00

Similar to SM4A342PM242C40c0490
IDE environment for the programming of the drives of the Titanio Line and SlimLine Line.

IDE environment for the programming of the drives of the Titanio Line and SlimLine Line.