SW4A4085C261-00c0380

Power supply voltage 18 [Vac] ÷ 100 [Vac]
Output current 0.0 [A/ph rms] ÷ 8.5 [A/ph rms] 0.0 [A/ph peak] ÷ 12.0 [A/ph peak]
Control mode CANBus CANopen (DS402)
Mounting Wall mounting
Digital inputs 4 optoisolated inputs
Digital outputs 2 optoisolated outputs
Analog inputs 2 analogues inputs (±10V)
Open or Close loop Open loop
Step resolution Stepless Control Technology (65536 emulated positions per turn)
Safety protections Over/under-voltage, over current, overheating, short circuit between motor phase to phase and phase to ground
Operative temperature 5 [°C]÷ 40 [°C]
Storage temperature -25 [°C] ÷ +55 [°C]
Humidity 5 [%] ÷ 85 [%]
Protection class IP20
Dimensions H x L x W 154.4 [mm] x 46.0 [mm] x 123.5 [mm]
Weight 0.65 [Kg]
Software settings and connections SCI service interface for configuration and debug in real time.

Functions

● Wide range of Positioning Control Modes (homing, relative, absolute, target)

● Autonomous management of the firmware for the execution of the homing, of the target movement with relative or absolute quota and for the generation of the ramp profiles

● Torque mode for operation with torque limitation

● Speed control thanks to digital inputs, analogue inputs or fieldbus

● Electronic CAM with advanced programming of internal profiles inside the drive

● Electric shaft with encoder or analogue input with variable tracking ratio (Electric Gear)

● Fast inputs and outputs for motor’ start & stop and event synchronization for high speed response applications such as labeling, nick finder, flying saw etc.● Possibility to synchronize the movements in multiaxis systems, even without fieldbus

● Enabling and on-the-fly changing of the motion control modes

Main Features

● Vectorial control

● Several fieldbus

● Serial Service for real time programming and debugging

   CONNECTORS KIT    

 Code       Description                     
 SW4X4KIT-C0                                          Connectors kit for cabling                               

   SOFTWARE KIT FOR CONFIGURATION

 Code       Description                     
 SW4_SERV00-SL      Kit software for drive configuration with Ever Studio + 200 cm service serial cable and serial/USB converter


Stepper drives > Two phases > Fieldbus > Titanio > SW4A4085C261-00c0380
Technologies

Ever Elettronica has been one of the first companies in the world to implement and validate the CANopen protocol and the DSP402 on its drives for stepper motors and brushless motors, starting from the early ‘90s.

Thanks to the ELSE technology integrated in the Ever Elettronica’s drives motors current control is so high that vibrations, resonances and noises don’t exist anymore.

Functionalities

Drive control through commands by master controller. Suitable for multi axes systems, built in powerfull Motion Module functionality assures perfect synchronization among axes and reduces master controller workload.

Connections

Connection for the parameters configuration is made through SCI service serial interface and the software tool Ever Studio that allow easy and quick configuration, a real time debug and a supervision of each system.

Stepper drives > Two phases > Fieldbus > Titanio > SW4A4085C261-00c0380

Fieldbus

Stepper drives > Two phases > Fieldbus > Titanio > SW4A4085C261-00c0380

Related products to SW4A4085C261-00c0380
High Efficiency 2 phases hybrid stepper motor.

High Efficiency 2 phases hybrid stepper motor.

High Efficiency 2 phases hybrid stepper motor with IP65 protection.

High Efficiency 2 phases hybrid stepper motor with IP65 protection.

Universal environment for the configuration and diagnostics of all drives of the Titanio line with fieldbus.

Universal environment for the configuration and diagnostics of all drives of the Titanio line with fieldbus.

Typical Applications of SW4A4085C261-00c0380
Contacts Newsletter