SW5A9052L2E1-30c0380

Power supply voltage 85 [Vac] ÷ 265 [Vac]
Separated logic power supply 24 [Vcc] ÷ 24 [Vcc]
Output current 0.0 [A/ph rms] ÷ 5.2 [A/ph rms] 0.0 [A/ph peak] ÷ 7.35 [A/ph peak]
Control mode CANBus CANopen (DS402) + Serial Modbus
Feedback Interface isolated interface for incremental encoder 5V differential RS422 or 5V Single -Ended (TTL/CMOS) +output encoder not isolated 5V Differential RS422 +absolute encoder isolated input SSI or BISS
Mounting Wall mounting
Digital inputs 4 optoisolated digital inputs 2-24 Vdc NPN, PNP or Line-Driver 2 MHz
Digital outputs 3 optoisolated digital outputs PNP, 24 Vdc - 100 mA
Analog inputs 1 analog input (potentiometer or ±10Vdc)
Open or Close loop Open loop or Closed loop with absolute or incremental encoder
Step resolution Stepless Control Technology (65536 emulated positions per turn)
Safety protections Over/under-voltage, over current, overheating, short circuit between motor phase to phase and phase to ground
Operative temperature 0 [°C]÷ 40 [°C]
Storage temperature -25 [°C] ÷ +55 [°C]
Humidity 5 [%] ÷ 85 [%]
Protection class IP20
Dimensions H x L x W 196.6 [mm] x 47.0 [mm] x 136.6 [mm]
Weight 0.55 [Kg]
Software settings and connections SCI service interface for configuration and debug in real time.

Certifications

Certifications UL

Functions

● Drive control through commands by Master Controller. Suitable for multi axes systems (up to 127 drives). Built in powerfull Motion Module functionality assures perfect synchronization among axes and reduces Master Controller workload.

● Wide range of Positioning Control Modes (homing, relative, absolute, target)

● Autonomous management of the firmware for the execution of the homing, of the target movement with relative or absolute quota and for the generation of the ramp profiles

● Torque mode for operation with torque limitation

● Speed control thanks to digital inputs, analogue inputs or fieldbus

● Electronic CAM with advanced programming of internal profiles inside the drive

● Electric shaft with encoder or analogue input with variable tracking ratio (Electric Gear)● Fast inputs and outputs for motor’ start & stop and event synchronization for high speed response applications such as labeling, nick finder, flying saw etc.

● Possibility to synchronize the movements in multiaxis systems, even without fieldbus

● Enabling and on-the-fly changing of the motion control modes

● Closed loop of torque, speed and position with incremental or absolute multiturn encoder

Main Features

● Can be powered from the main AC supply (230 Vac)

● Vectorial control

● UL recognized certified

● Safe Torque Off inputs (STO) SIL3/PLe

● Several fieldbus

● Serial Service for real time programming and debugging

   CONNECTORS KIT    

 Codice       Descrizione                     
 SW5A9KIT-C2                                          Connectors kit for cabling                               

   SOFTWARE KIT FOR CONFIGURATION

 Code       Description                     
 SW5_SERV00-SL      Kit for the drive configuration with Ever Studio software + 200 cm service serial cable and serial/USB converter


SW5 is a new line of fieldbus vector drives belonging to the Titanio family, characterised by innovative performance. Built by integrating the new ‘Else - Error Less Servo Efficient technology’ with the accurate control of the sinusoidal current, these drives allow to command stepper motors also in closed loop of torque speed and position, with a drastic noise reduction, less heating and extremely smooth movements. Suitable for driving 2-phase hybrid stepper motors, they can be coupled mainly with the series of motors from 3.4” to 4.2”. Completely digital and made using Arm Core M4 technology, SW5 drives offer exceptional reliability combined with mechanical compactness and a competitive price. They can be used in many types of machines where there is already a fieldbus master controller to control single or multi-axle systems. Their use is of the 'general purpose' type and they are particularly suitable in labelling machines, laser cutters, pick-place devices, engraving tables, etc. or in any case in all applications in which not only versatility, precision and speed are required, but also smooth and silent movements as in the medical field.


Stepper drives > Two phases > Fieldbus > Titanio > SW5A9052L2E1-30c0380
Technologies

Find out what Safe Torque Off STO is and how it works on our drives for stepper motors and brushless motors!

Internal production of our drives is our strenght, as it means Made in Italy quality for our customers. Find out what happens "behind the scenes".

Modbus is a communication protocol among the most widely used standards in the world of industrial devices. All our devices equipped with a serial interface (RS232 or RS485) implement and support the Modbus RTU protocol.

Ever Elettronica has been one of the first companies in the world to implement and validate the CANopen protocol and the DSP402 on its drives for stepper motors and brushless motors, starting from the early ‘90s.

Thanks to the ELSE technology integrated in the Ever Elettronica’s drives motors current control is so high that vibrations, resonances and noises don’t exist anymore.

Functionalities

Drive control through commands by master controller. Suitable for multi axes systems, built in powerfull Motion Module functionality assures perfect synchronization among axes and reduces master controller workload.

Connections

The connection for setting the configuration parameters is made via the service serial interface and the proprietary software tool Ever Studio which also allows a real-time debugging of all the drive functions.

Stepper drives > Two phases > Fieldbus > Titanio > SW5A9052L2E1-30c0380

Fieldbus

Stepper drives > Two phases > Fieldbus > Titanio > SW5A9052L2E1-30c0380
Stepper drives > Two phases > Fieldbus > Titanio > SW5A9052L2E1-30c0380

Related products to SW5A9052L2E1-30c0380
High Efficiency and high voltage 2 phases hybrid stepper motor

High Efficiency and high voltage 2 phases hybrid stepper motor

Universal environment for the configuration and diagnostics of all drives of the Titanio line with fieldbus.

Universal environment for the configuration and diagnostics of all drives of the Titanio line with fieldbus.

Contacts Newsletter