You are here:

LMED5D1

Flange NEMA 23 - Ø 57 mm round
Winding type Delta
Hall sensor angle 120 [° electric angle]
Rated voltage 36.00 [Volt]
Drive supply voltage 36.00 [Vcc]
Control mode Voltage/Speed analog reference
Analog inputs 0 ~ 5 Vdc
Status LED Green for normal status
Velocity 4000 [rpm]
Poles 4
Phase 3
Rated torque 32.00 [Ncm] min.
Power 134.00 [W]
Phase resistance 0,45 [Ohm] ± 10 [%]
Phase inductance 1,65 [mH] ± 20 [%]
Torque constant 0,061 [Nm/A]
B.E.M.F. 4,9 [Vrms/Krpm]
Rated current 0.00 [A/ph]
Rotor inertia 119 [g.cm²]
Wires number 7 pins for power supply and control
Connection With connector
Ambient temperature -20 [°C] ~ +40 [°C]
Temperature rise 80 [K]
Humidity 15 [%] ~ 90 [%]
Insulation resistance 100 [Mohm min.]
Dielectric strength 500 [Vcc 1 Minute]
Insulation class Class B, 130°C
Max. shaft radial load 75 [N]
Max. shaft axial load 15 [N]
Shaft radial play 0,025 [mm] max. 460 [g.] load
Shaft axial play 0,025 [mm] max. 400 [g.] load
Length 124.00 [mm]
Shaft Single shaft
Dimensions H x L x W 57,0 [mm] x 57,0 [mm] x 124,0 [mm]
Weight 1,50 [Kg.]
Protection class IP30

Feedback

Feedback Hall sensor
Motors with Integrated Electronics > Brushless DC with integrated drives > LMED5D1

Mechanical drawing

Dimensions in mm

LMED5D1_dismec

Connection diagram

Motors with Integrated Electronics > Brushless DC with integrated drives > LMED5D1
Typical Applications of LMED5D1
< LMED5C1
Brushless DC with integrated drives
LMED5E1 >
Contacts Newsletter