SW5A9030L221-20c0380

Power supply voltage 100 [Vac] ÷ 240 [Vac]
Output current 0.0 [A/ph rms] ÷ 3.0 [A/ph rms] 0.0 [A/ph peak] ÷ 4.20 [A/ph peak]
Interface control mode CANBus CANopen (DS402) + Serial Modbus
Digital inputs 4 optoisolated inputs +1 isolated interface for incremental encoder 5V differential RS422 or 5V Single -Ended (TTL/CMOS) + absolute encoder isolated input SSI or BISS-C
Digital outputs 3 optoisolated digital outputs
Open or Close loop Open loop or Closed loop with absolute or incremental encoder
Step resolution Stepless Control Technology (65536 emulated positions per turn)
Safety protections Over/under-voltage, over current, overheating, short circuit between motor phase to phase and phase to ground
Operative temperature 5 [°C] ~ 50 [°C]
Storage temperature -25 [°C] ~ +55 [°C]
Humidity 5 [%] ~ 85 [%]
Protection class IP20
Dimensions H x L x W 180.7 [mm] x 50.0 [mm] x 138.5 [mm]
Weight ~ 0.80 [Kg.]
Software settings and connections SCI service interface for configuration and debug in real time.

Principal features

  1. ● Powered from the main AC supply
  2. ● Vectorial control
  3. ● Absolute or incremental encoder inputs
  4. ● SIL3/PLe Safe Torque Off inputs (STO)
  5. ● Closed loop with incremental or absolute encoder
  6. ● Serial Service for real time programming and debugging

Functions

  1. ● Drive control through commands by Master Controller. Suitable for multi axes systems (up to 127 drives). Built in powerfull Motion Module functionality assures perfect synchronization among axes and reduces Master Controller workload.
  2. ● Wide range of Positioning Control Modes (homing, relative, absolute, target)
  3. ● Autonomous management of the firmware for the execution of the homing, of the target movement with relative or absolute quota and for the generation of the ramp profiles
  4. ● Torque mode for operation with torque limitation
  5. ● Speed control thanks to digital inputs or fieldbus
  6. ● Electronic CAM with advanced programming of internal profiles inside the drive
  7. ● Electric shaft with encoder or analogue input with variable tracking ratio (Electric Gear)
  8. ● Fast inputs and outputs for motor’ start & stop and event synchronization for high speed response applications such as labeling, nick finder, flying saw etc.
  9. ● Possibility to synchronize the movements in multiaxis systems, even without fieldbus
  10. ● Enabling and on-the-fly changing of the motion control modes
  11. ● Closed loop of torque, speed and position with incremental or absolute multiturn encoder

   CONNECTORS KIT    

 Codice       Descrizione                     
 SW5A93KIT-C1                                          Connectors kit for cabling                               

   SOFTWARE KIT FOR CONFIGURATION

 Code       Description                     
 SW5_SERV00-SL      Kit for the drive configuration with Ever Studio software + 200 cm service serial cable and serial/USB converter


SW5 is a new line of fieldbus vector drives belonging to the Titanio family, characterised by innovative performance. Built by integrating the new ‘Else - Error Less Servo Efficient technology’ with the accurate control of the sinusoidal current, these drives allow to command stepper motors also in closed loop of torque speed and position, with a drastic noise reduction, less heating and extremely smooth movements. Suitable for driving 2-phase hybrid stepper motors, they can be coupled mainly with the series of motors from 2.3” to 4.2”. Completely digital and made using Arm Core M4 technology, SW5 drives offer exceptional reliability combined with mechanical compactness and a competitive price. They can be used in many types of machines where there is already a fieldbus master controller to control single or multi-axle systems. Their use is of the 'general purpose' type and they are particularly suitable in labelling machines, laser cutters, pick-place devices, engraving tables, etc. or in any case in all applications in which not only versatility, precision and speed are required, but also smooth and silent movements as in the medical field.


SW5A9030L221-20_01
Technologies

Modbus is a communication protocol among the most widely used standards in the world of industrial devices. All our devices equipped with a serial interface (RS232 or RS485) implement and support the Modbus RTU protocol, while all the new generation devices that have an Ethernet interface support Modbus TCP/IP. Discover more!

CANbus fieldbus with DS301 protocol.

Functions

Drive control through commands by master controller. Suitable for multi axes systems, built in powerfull Motion Module functionality assures perfect synchronization among axes and reduces master controller workload.

Connections

The connection for setting the configuration parameters is made via the service serial interface and the proprietary software tool Ever Studio which also allows a real-time debugging of all the drive functions.

SW5A9030_colleg_06

Fieldbus

Logo_Canopen_ds402
Logo_Modbus_

Related products to SW5A9030L221-20c0380
High Efficiency and high voltage 2 phases hybrid stepper motor

High Efficiency and high voltage 2 phases hybrid stepper motor

High Efficiency 2 phases hybrid stepper motor with IP65 protection.

High Efficiency 2 phases hybrid stepper motor with IP65 protection.

 Universal environment for the configuration and diagnostics of all drives of the Titanio line with fieldbus.

Universal environment for the configuration and diagnostics of all drives of the Titanio line with fieldbus.

Contacts Newsletter